Going to be running an humidity controlled extractor fan from the ceiling in my bathroom above my shower, into the loft and out the gable end wall. I would want the facing flush on the ceiling it at all possible. Bathroom is 2.2w x 3.5h x 2d (metres).
Doing it this way sadly means a duct length of 4.5m with 1 90 degree bend. It is either that or I have to get it vented through the roof and involve roofers etc which Id prefer to avoid.
Thanks.
Doing it this way sadly means a duct length of 4.5m with 1 90 degree bend. It is either that or I have to get it vented through the roof and involve roofers etc which Id prefer to avoid.
Thanks.