Hi, can anybody give me some advice please. While testing a ring main, I have found that I have an incomplete circuit on the phase conductor, neutral is fine and cpc is fine although the reading on the cpc is quite high.
I have tested each 'half' of the phase conductor by connecting one end of the ring at a time at the consumer unit, and have established which socket outlets work on each 'half', but don't really know what to do next as I don't know which way the circuit is running.
Also, I've removed a few of the socket outlets to try to see if a cable has come loose or anything but the cables are so tight and short that it's virtually impossible to disconnect / reconnect them.
Any halp greatly appreciated.
Many thanks.
I have tested each 'half' of the phase conductor by connecting one end of the ring at a time at the consumer unit, and have established which socket outlets work on each 'half', but don't really know what to do next as I don't know which way the circuit is running.
Also, I've removed a few of the socket outlets to try to see if a cable has come loose or anything but the cables are so tight and short that it's virtually impossible to disconnect / reconnect them.
Any halp greatly appreciated.
Many thanks.