- Joined
- 2 Apr 2016
- Messages
- 7
- Reaction score
- 0
- Country
Hi,
I have a Salamander 'RIGHT RSP 75' pump that feeds x2 showers. One shower works fine with no problems at all. However the other shower began with a fault some time ago where it would not start the pump unless the shower was on full cold to start with. Now it doesn't work at all now.
I'm assuming this is a sensor fault.
Any advise as to the best and most cost effective solution would appreciated.
I have very average plumbing knowledge, so go easy on me!
Thanks in advance for any help.
Chris
I have a Salamander 'RIGHT RSP 75' pump that feeds x2 showers. One shower works fine with no problems at all. However the other shower began with a fault some time ago where it would not start the pump unless the shower was on full cold to start with. Now it doesn't work at all now.
I'm assuming this is a sensor fault.
Any advise as to the best and most cost effective solution would appreciated.
I have very average plumbing knowledge, so go easy on me!
Thanks in advance for any help.
Chris