- Joined
- 15 Jan 2006
- Messages
- 11
- Reaction score
- 0
- Country
Firstly, hello - first post !!
Please let me know if I have done something stupid.
I have wired a unswitched FCU, via a 4 way JB,using the supply from the lighting circuit and a switch from a 2G fitting in the kitchen. I want to use it to connect a LV transformer, to run some cabinet lights.
However, it aint working !! If I remove the switch from the JB and rewire the FCU directly into the circuit, it works, but when I introduce the switch, it doesn\\\'t. If I put a meter across the perm live and SW live I get a strange reading of about 128V, indicating a volt drop somewhere on the switch circuit ?? Why ?? I have checked for continuity and re seated all the connections, but still nothing ?
Please let me know if I have done something stupid.
I have wired a unswitched FCU, via a 4 way JB,using the supply from the lighting circuit and a switch from a 2G fitting in the kitchen. I want to use it to connect a LV transformer, to run some cabinet lights.
However, it aint working !! If I remove the switch from the JB and rewire the FCU directly into the circuit, it works, but when I introduce the switch, it doesn\\\'t. If I put a meter across the perm live and SW live I get a strange reading of about 128V, indicating a volt drop somewhere on the switch circuit ?? Why ?? I have checked for continuity and re seated all the connections, but still nothing ?