Hi I'm no heating engineer. Anyway my problem is that my boiler will not ignite for either dhw or ch . Tried Reset green ,ignition led flashes for a few seconds cuts out then the red led boiler (shut down) comes on , it sounds like the fan/pump starts , no sign of any clicking noise . Any help would be appreciated before I have to bite the bullet and buy a new boiler.
Planning on stripping PCB down once I get in to check for any dry solder connections and also the relays.
Thanks for any help
( anyone recommend a good boiler around the £600 /£800 mark for a 3 bed house while I'm at it ) thanks
Planning on stripping PCB down once I get in to check for any dry solder connections and also the relays.
Thanks for any help
( anyone recommend a good boiler around the £600 /£800 mark for a 3 bed house while I'm at it ) thanks