- Joined
- 30 May 2022
- Messages
- 18
- Reaction score
- 0
- Country
Recently had an FD30 firedoor installed by joiner between garage and house and the gap on top is 6-7mm. Gap to sides is <4mm which seems fine.
I have asked for it to be re-hung - is this reasonable request ? As I have seen this should be <4mm gap - it has the fire strips and brush on frame but the top of door does not make contact with brush only sides.
I have asked for it to be re-hung - is this reasonable request ? As I have seen this should be <4mm gap - it has the fire strips and brush on frame but the top of door does not make contact with brush only sides.