Hi,
I am replacing my existing toilet and think I may come across problems.
The soil pipe is fixed and quite low and flush to the wall with a small connector pipe to the toliet, the toilet I have appears to have quite a low waste pipe (centre is approx. 175mm for floor), but as I am laying down 6mm ply, it is going come up even higher.
I think I need a toilet with a very low waste pipe, or is there a suitable connector I can use - I have seen offset and flexi connectors but am not sure if it will work with my soil pipe (pictures below).
Also, do the fill pipes look like they are in standard position, or will these need to be adjusted also?
Any other advice appreciated.
Thanks in advance.
I am replacing my existing toilet and think I may come across problems.
The soil pipe is fixed and quite low and flush to the wall with a small connector pipe to the toliet, the toilet I have appears to have quite a low waste pipe (centre is approx. 175mm for floor), but as I am laying down 6mm ply, it is going come up even higher.
I think I need a toilet with a very low waste pipe, or is there a suitable connector I can use - I have seen offset and flexi connectors but am not sure if it will work with my soil pipe (pictures below).
Also, do the fill pipes look like they are in standard position, or will these need to be adjusted also?
Any other advice appreciated.
Thanks in advance.