- Joined
- 18 Jul 2017
- Messages
- 38
- Reaction score
- 1
- Country
Hi.
Im replacing or old rusty panel radiator with a towel warmer. Never changed one before but thought I'd have a go. I bought the radiator from b&q but it didn't com re with and valves so I've bought those separate. I've gone to screw the valves into the radiator but they seem very loose. The installation guide says to use ptfe tape. Will that be enough to get a good seal?
Thanks for any help
J
Im replacing or old rusty panel radiator with a towel warmer. Never changed one before but thought I'd have a go. I bought the radiator from b&q but it didn't com re with and valves so I've bought those separate. I've gone to screw the valves into the radiator but they seem very loose. The installation guide says to use ptfe tape. Will that be enough to get a good seal?
Thanks for any help
J
Last edited: