floorboard gaps

[jsn1]

I want to have exposed floor boards in the bedrooms/landing, however there are a fair old few gaps in between them.

Does anyone have any sollutions?

I have read about a product called draughtex but i cant see how this stays in place as it uses no adhesive?

Thanks in advance

 

[flameport]

Remove all of the boards and relay them so there are no gaps, preferably fixing them with screws.

You will be left with a substantial gap at the edge of the room.
Remove a board from another room (which will have carpet or whatever in it) to fill the gap and replace that with a new board. (new one won't match, but won't be seen either)

Sand & finish the floor as desired.

For a quality job, the skirting should be removed first, and replaced after the floor is finished.

All of the above will take much longer and cost significantly more than a decent carpet.