Hi folks,
Looking for advice on material (type & thickness) for a shed floor? ideally something with a decent lifespan and not too expensive. Was thinking oak floorboards but figure the cost would be pretty high so maybe exterior or marine ply, OSB, scaffold boards, treated softwood, something else?
Shed is to be 12’x 8’ (3.6 x 2.4m) floor will be supported on 3”x3” (75x75mm) tannelised fence posts (acting as joists/bearers???) at 24” (600mm) centres - all sizes approx.
General garden / diy use but will also be used to store motorbike(s) over winter…
Thanks
Looking for advice on material (type & thickness) for a shed floor? ideally something with a decent lifespan and not too expensive. Was thinking oak floorboards but figure the cost would be pretty high so maybe exterior or marine ply, OSB, scaffold boards, treated softwood, something else?
Shed is to be 12’x 8’ (3.6 x 2.4m) floor will be supported on 3”x3” (75x75mm) tannelised fence posts (acting as joists/bearers???) at 24” (600mm) centres - all sizes approx.
General garden / diy use but will also be used to store motorbike(s) over winter…
Thanks