Hi I’m planning on running led lights down my drive which are 12v.
I have armoured cable clipped down the side of the house which runs to the front. It goes under the patio and back up the onto the garden wall which leads into the front of the house.
This is on an FCU from the back of the house which is on the downstairs ring on an RCD (redundant FCU from an electric fireplace) not on the kitchen circuit.
The 12v lights I plan on using are on a 3 pin 240v plug with a driver. This driver is waterproof ip68 so I could in theory just put a weatherproof socket ont he wall on the armoured cable and sit it on the floor etc. ideally I’d like to put it in an enclosure, but don’t really want a double socket AND a boxes on the wall.
Would there be a configuration to mount a weatherproof box on the wall which the armoured cable terminates into, then a socket inside the box along with the 12v driver etc?
Thanks in advance
Connor Bracegirdle
I have armoured cable clipped down the side of the house which runs to the front. It goes under the patio and back up the onto the garden wall which leads into the front of the house.
This is on an FCU from the back of the house which is on the downstairs ring on an RCD (redundant FCU from an electric fireplace) not on the kitchen circuit.
The 12v lights I plan on using are on a 3 pin 240v plug with a driver. This driver is waterproof ip68 so I could in theory just put a weatherproof socket ont he wall on the armoured cable and sit it on the floor etc. ideally I’d like to put it in an enclosure, but don’t really want a double socket AND a boxes on the wall.
Would there be a configuration to mount a weatherproof box on the wall which the armoured cable terminates into, then a socket inside the box along with the 12v driver etc?
Thanks in advance
Connor Bracegirdle