- Joined
- 13 May 2019
- Messages
- 79
- Reaction score
- 5
- Country
Hello all...
I'm hoping someone can help me out with this one.
I'm looking to have 6 bollard style coloured smart led lights for our patio.
I got the electrician in to do the swa 240V cabling from the garage to the garden.
There are two cables in the garden, one for the lighting and one for a twin socket.
Now I'm ready to buy the lights and found these but I just want to know how they should be wired up.
https://shop.ledvance.com/products/ledvance-smart-flare-multicolor-60cm-post
The cable has six individual Pratley IP68 under ground enclosures for lightingpoints.
As far I can see, each light is wired separately and not in a loop.
Can I use 13amp cable to wire it/them to the Pratley IP68 junction box/s ?
Many Thanks in advance for your help.
Andy
I'm hoping someone can help me out with this one.
I'm looking to have 6 bollard style coloured smart led lights for our patio.
I got the electrician in to do the swa 240V cabling from the garage to the garden.
There are two cables in the garden, one for the lighting and one for a twin socket.
Now I'm ready to buy the lights and found these but I just want to know how they should be wired up.
https://shop.ledvance.com/products/ledvance-smart-flare-multicolor-60cm-post
The cable has six individual Pratley IP68 under ground enclosures for lightingpoints.
As far I can see, each light is wired separately and not in a loop.
Can I use 13amp cable to wire it/them to the Pratley IP68 junction box/s ?
Many Thanks in advance for your help.
Andy