- Joined
- 2 Oct 2015
- Messages
- 75
- Reaction score
- 2
- Country
I'm looking at running a power supply to a garden office for 8 double sockets, an internal lighting circuit and an external lighting circuit.
In my home consumer unit (house was fully rewired with new CU in 2020), I have a spare B40 MCB.
Am I able to go from the B40 with 6mm T&E to 3 Core 6mm SWA (connected with Wago connectors and gland connector in IP66 wall box) buried underground to the office where that will be connected to 6mm T&E inside another IP66 wall box with gland kit, through the office wall and then go to an internal 3 way Axiom CU?
From the 3 way Axiom CU in the office, I was going to use the B32 for the sockets ring main, the B16 for the 6 internal 4w spot lights and the B6 for the external light.
Am I able to do that from the B40 MCB in the house CU?
In my home consumer unit (house was fully rewired with new CU in 2020), I have a spare B40 MCB.
Am I able to go from the B40 with 6mm T&E to 3 Core 6mm SWA (connected with Wago connectors and gland connector in IP66 wall box) buried underground to the office where that will be connected to 6mm T&E inside another IP66 wall box with gland kit, through the office wall and then go to an internal 3 way Axiom CU?
From the 3 way Axiom CU in the office, I was going to use the B32 for the sockets ring main, the B16 for the 6 internal 4w spot lights and the B6 for the external light.
Am I able to do that from the B40 MCB in the house CU?