Hello
I have a Gardtec 595 alarm system with a wireless module attached. There is a pir sensor in an outbuilding that is wired into a wireless transmitter.
I can't find any documentation on how to set up or program the wireless section.
The house was vacant with power off for best part of a year. On recommissioning the alarm, the wireless sensor indicated it had a battery fault on the keypad, replacing the battery indicated a tamper check, so I assumed it was working.
On arming alarm and walking around the pir sensor, it lights up green, then red indicating movment, but the alarm won't sound. I've changed the zone type and knock timings but to no avail.
Is there a way to default the sensor and re pair it to the panel? Any where I can get wireless module manual?
Thanks Neil
I have a Gardtec 595 alarm system with a wireless module attached. There is a pir sensor in an outbuilding that is wired into a wireless transmitter.
I can't find any documentation on how to set up or program the wireless section.
The house was vacant with power off for best part of a year. On recommissioning the alarm, the wireless sensor indicated it had a battery fault on the keypad, replacing the battery indicated a tamper check, so I assumed it was working.
On arming alarm and walking around the pir sensor, it lights up green, then red indicating movment, but the alarm won't sound. I've changed the zone type and knock timings but to no avail.
Is there a way to default the sensor and re pair it to the panel? Any where I can get wireless module manual?
Thanks Neil