Hi
I currently have a gardtech house alarm and wanted to disable one of my sensors. I tried to remove the zone using the manual but it did not seem to work. I then tried to remove the wires from the required sensor which made the house alarm sound. After about 15minutes the alarm stopped, the keypad has no power to it, and neither does all the sensors in the house and the lights that are always on the alarm outdoes ( even when it is deactivated) are not on.
Can any one help?
I've put the wires in the correct place and checked all fuses and they are fine.[/img]
I currently have a gardtech house alarm and wanted to disable one of my sensors. I tried to remove the zone using the manual but it did not seem to work. I then tried to remove the wires from the required sensor which made the house alarm sound. After about 15minutes the alarm stopped, the keypad has no power to it, and neither does all the sensors in the house and the lights that are always on the alarm outdoes ( even when it is deactivated) are not on.
Can any one help?
I've put the wires in the correct place and checked all fuses and they are fine.[/img]