Hi, i'm fitting my kitchen at the minute and i have instructions for the gas hob which seem contradictiory. The plan is to have an extractor fan unit 600mm wide directly above the hob, with wall units either side.
The hob instructions have a diagram showing a min distance of 420mm between worktop and the bottom of wall cabinent either side is the distance between wall units is 600mm wide.
However it also says
"NOTE: if distance “A” between the kitchen cabinets is between 600 mm and 750 mm, height “B” must be at least 530 mm. If distance “A” between the kitchen cabinets is greater than the width of the hob, height “B” must be at least 400 mm. If a hood is installed above the hob, refer to the assembly instructions for the hood to see the necessary distance.
Am i missing something, the hob is 596mm wide, so if distance A is 600mm or greater then it satisfies both conditions right?
Thanks
The hob instructions have a diagram showing a min distance of 420mm between worktop and the bottom of wall cabinent either side is the distance between wall units is 600mm wide.
However it also says
"NOTE: if distance “A” between the kitchen cabinets is between 600 mm and 750 mm, height “B” must be at least 530 mm. If distance “A” between the kitchen cabinets is greater than the width of the hob, height “B” must be at least 400 mm. If a hood is installed above the hob, refer to the assembly instructions for the hood to see the necessary distance.
Am i missing something, the hob is 596mm wide, so if distance A is 600mm or greater then it satisfies both conditions right?
Thanks