- Joined
- 19 Jul 2008
- Messages
- 5,898
- Reaction score
- 1,039
- Country
Anyone good at Glow-worm 30 Cxi Gc n0: 47-047-24. Manufacture year 1206.
Went to change gasket on main h/exh, as usual took out whole unit from gas point at bottom of casing at o,ring, To front of h/exch. Took out and cleaned siphon that's it really.
All done put back together went to start up fan hunting, bum.
Symptoms are; green light flashes on and off, display flashes along with green light and reads 8.8, underneath C bar and continues while the fan oscillates on and off. Gas valve lets-by to h/exch chamber. No spark naught, it continues in this fashion with no lockout at all. I have now updated instructions downloaded when I got home, so tomorrow at least I can test fan input ie: 24V DC across blue & red and check gas valve, still very limited info on instructions.
Any ideas before another attack on morrow PCB is 140.00 + Vat, fan similar expensive to part swop out, not my style.
I did test and all was working fine before gasket change.
Cheers.
Went to change gasket on main h/exh, as usual took out whole unit from gas point at bottom of casing at o,ring, To front of h/exch. Took out and cleaned siphon that's it really.
All done put back together went to start up fan hunting, bum.
Symptoms are; green light flashes on and off, display flashes along with green light and reads 8.8, underneath C bar and continues while the fan oscillates on and off. Gas valve lets-by to h/exch chamber. No spark naught, it continues in this fashion with no lockout at all. I have now updated instructions downloaded when I got home, so tomorrow at least I can test fan input ie: 24V DC across blue & red and check gas valve, still very limited info on instructions.
Any ideas before another attack on morrow PCB is 140.00 + Vat, fan similar expensive to part swop out, not my style.
I did test and all was working fine before gasket change.
Cheers.