My CH system has the following configuration which is in need of an update to gain some control of the HW:
Potterton Kingfisher Boiler with gravity HW and pumped single pipe CH. Boiler stat only used. Siebe Lifestyle LP241 programmer.
On the basis of keeping it simple and having read the many comments on this forum it seems that an update to the honeywell "C plan" configuration would do the trick to introduce some control to the HW circuit.
At this stage I would like to continue with the boiler stat and do without the room stat. I know this doesn't meet current standards but there are many other jobs to do first.
My query is, where does the wire from the controller that is shown in the plan as going to position 4 of the junction box now go, if I do without a room stat and is there anything else I have missed?
Thanks
Potterton Kingfisher Boiler with gravity HW and pumped single pipe CH. Boiler stat only used. Siebe Lifestyle LP241 programmer.
On the basis of keeping it simple and having read the many comments on this forum it seems that an update to the honeywell "C plan" configuration would do the trick to introduce some control to the HW circuit.
At this stage I would like to continue with the boiler stat and do without the room stat. I know this doesn't meet current standards but there are many other jobs to do first.
My query is, where does the wire from the controller that is shown in the plan as going to position 4 of the junction box now go, if I do without a room stat and is there anything else I have missed?
Thanks