I'm nearly ready to grout the flooring in my en-suite which has been laid onto WBP and had a look at the selection of BAL products available and was surprised by the amount of choices.
Can anyone recommend a grout for flooring and a suitable additive to give it some flexibilty?
The tiles are large format beige porcelain so was planning to use grey on the flooring and white on the walls.
I'm also going to be doing the walls next which are made up of a mixture of new plasterboard, aquapanel cement board(in the wet area) and the old plasterboard walls that have been skimmed and painted previously.
Having read the information on the back of the adhesive bag(BAL single part flexible) it suggests priming the plasteboard before hand but there's no mention about the aquapanel. Does anyone know if I should I treat this the same as plasterboard and prime as well?
Can anyone recommend a grout for flooring and a suitable additive to give it some flexibilty?
The tiles are large format beige porcelain so was planning to use grey on the flooring and white on the walls.
I'm also going to be doing the walls next which are made up of a mixture of new plasterboard, aquapanel cement board(in the wet area) and the old plasterboard walls that have been skimmed and painted previously.
Having read the information on the back of the adhesive bag(BAL single part flexible) it suggests priming the plasteboard before hand but there's no mention about the aquapanel. Does anyone know if I should I treat this the same as plasterboard and prime as well?