Just bought a load of Floplast guttering for a wooden cabin.
Any ideas with regards to packing behind the gutter brackets to level out guttering on angled fascias? Can't seem to find anything online that provides a solution. One idea I had was to thread screws thru the bracket then a suitably sized nut then fix to fascia. Not sure if that'll do the job or not, so any other suggestions are welcome.
Cheers.
Any ideas with regards to packing behind the gutter brackets to level out guttering on angled fascias? Can't seem to find anything online that provides a solution. One idea I had was to thread screws thru the bracket then a suitably sized nut then fix to fascia. Not sure if that'll do the job or not, so any other suggestions are welcome.
Cheers.