Hello,
I have cut some holes in the ceiling( they are large square holes for speakers) I noticed after that there was around 3 or 4 hairline cracks near where I have cut out the plaster board, They are not strait cracks, so not the board joints, they are the Zig Zag type, and I have looked it is the skim and not the board cracked.
I have found the end of all of them and placed a tiny pilot drill in to stop them chasing any longer.
What is best to fill a crack like this?
Some say just a standard filler, as they should not move again.
Some say a flexible filler put on with a wet spatula ( can you put normal filler on top if you don’t get it flush?)
Thank you
Darren
I have cut some holes in the ceiling( they are large square holes for speakers) I noticed after that there was around 3 or 4 hairline cracks near where I have cut out the plaster board, They are not strait cracks, so not the board joints, they are the Zig Zag type, and I have looked it is the skim and not the board cracked.
I have found the end of all of them and placed a tiny pilot drill in to stop them chasing any longer.
What is best to fill a crack like this?
Some say just a standard filler, as they should not move again.
Some say a flexible filler put on with a wet spatula ( can you put normal filler on top if you don’t get it flush?)
Thank you
Darren