I have the Baxi 105e and have already replaced the mechanical timer with the electronic 7 day timer (which incidentally, I find to be an appallingly designed user interface). All but one of our rads have TRVs but actually balancing these and the timer correctly for the whole house without a room thermostat and without constant trips to the boiler timer has proved to be impossible.
How easy it is to fit a wireless room stat to use with this boiler in combination/instead of the current timer?
Can this room stat also have programmer functions that can be used instead of the one on the boiler?
Can any standard wireless stat/programmer (Danfoss, Honeywell etc.) be wired into this boiler, or would it need to be the Baxi one (and if so where would be a good place to source it).
Any help appreciated greatly.
Chris
How easy it is to fit a wireless room stat to use with this boiler in combination/instead of the current timer?
Can this room stat also have programmer functions that can be used instead of the one on the boiler?
Can any standard wireless stat/programmer (Danfoss, Honeywell etc.) be wired into this boiler, or would it need to be the Baxi one (and if so where would be a good place to source it).
Any help appreciated greatly.
Chris