hello Everyone, today I fitted a new Salamander shower pump, and as such I switched off the mains water tap, and also the outlet and inlets from the cylinder, and left the taps open so as to drain them.
I then finished and turned all of the valves back on.
Now the water is running fine, the pressure is OK, the cold water is great, but and it is a big but. The water is not getting hot, not is the central
heating working.
I have a glow worm ultimate 30ff boiler, a cylinder with a thermostat,
a central heating pump and a 3 port drayton motorised valve (all near the cyclinder).
Please please help as my fiance is about to kill me!!
Thanks Guys!!
I then finished and turned all of the valves back on.
Now the water is running fine, the pressure is OK, the cold water is great, but and it is a big but. The water is not getting hot, not is the central
heating working.
I have a glow worm ultimate 30ff boiler, a cylinder with a thermostat,
a central heating pump and a 3 port drayton motorised valve (all near the cyclinder).
Please please help as my fiance is about to kill me!!
Thanks Guys!!