Hi All,
Just built a small enclosed porch to the front of our house. I now need to bring the new floor up, over the top of the old concrete porch base, and level to the existing floor inside the hallway.
As can be seen in the attached side cutaway pic, the floor needs to come up a maximum of 94mm over the new block and beam base, but over the old base the depths are all over the shop!
The area lengths are shown, and the area width is 2030mm.
Any ideas how to fill the voids and get the concrete in, do I just pack it up with Celotex/Kingspan board?
Cheers.
Just built a small enclosed porch to the front of our house. I now need to bring the new floor up, over the top of the old concrete porch base, and level to the existing floor inside the hallway.
As can be seen in the attached side cutaway pic, the floor needs to come up a maximum of 94mm over the new block and beam base, but over the old base the depths are all over the shop!
The area lengths are shown, and the area width is 2030mm.
Any ideas how to fill the voids and get the concrete in, do I just pack it up with Celotex/Kingspan board?
Cheers.