- Joined
- 28 Nov 2010
- Messages
- 59
- Reaction score
- 5
- Country
hi all
Approx 11 months ago had my bathroom completely renovated. Had a grohe bath filler/shower fitted along with a 2.6bar salamander pump. All working great up until last week. For no apparent reason the hot side isn’t firing as fast as it previously did when filling bath. (Shower seems the same I think)I only have to mix the slightest amount of cold and the pressure from the cold takes over the hot. When you turn the hot tap on very slightly (it’s a quarter turn) there is a kind of grinding noise, almost like some debris in the tap head. I’ve had the cartridge out of hot side and everything appears normal. Pump still sounds normal, not straining or making any unusual sounds. Any ideas anyone as to what the issue is ? Thanks in advance. Link for tap below
https://www.victorianplumbing.co.uk...W-8KRmcDwtNmqJuJ5tEaAknxEALw_wcB&gclsrc=aw.ds
Approx 11 months ago had my bathroom completely renovated. Had a grohe bath filler/shower fitted along with a 2.6bar salamander pump. All working great up until last week. For no apparent reason the hot side isn’t firing as fast as it previously did when filling bath. (Shower seems the same I think)I only have to mix the slightest amount of cold and the pressure from the cold takes over the hot. When you turn the hot tap on very slightly (it’s a quarter turn) there is a kind of grinding noise, almost like some debris in the tap head. I’ve had the cartridge out of hot side and everything appears normal. Pump still sounds normal, not straining or making any unusual sounds. Any ideas anyone as to what the issue is ? Thanks in advance. Link for tap below
https://www.victorianplumbing.co.uk...W-8KRmcDwtNmqJuJ5tEaAknxEALw_wcB&gclsrc=aw.ds