Hi
I have fitted a new monobloc tap to my new sink.
https://www.screwfix.com/p/single-l...ck/6480t#product_additional_details_container
My hot water pressure is pretty poor and I see the flexi tails that were supplied have only a 6mm bore. Fine for the cold mains with plenty pressure but not the hot. I want a flexi tail with a bigger bore.
The package says:
Supplied with Flexible Hose. Hose Dia x Bore x L: 10mm x 6 x 360mm
Tap, 2 x ½" BSP female flexible braided hose with built-in pre-filters and fixings.
None of the 1/2" x 15mm tails I see on the internet have the right fitting. Only the 10mm x 15mm ones look the same.
What size do I need?
Thanks
I have fitted a new monobloc tap to my new sink.
https://www.screwfix.com/p/single-l...ck/6480t#product_additional_details_container
My hot water pressure is pretty poor and I see the flexi tails that were supplied have only a 6mm bore. Fine for the cold mains with plenty pressure but not the hot. I want a flexi tail with a bigger bore.
The package says:
Supplied with Flexible Hose. Hose Dia x Bore x L: 10mm x 6 x 360mm
Tap, 2 x ½" BSP female flexible braided hose with built-in pre-filters and fixings.
None of the 1/2" x 15mm tails I see on the internet have the right fitting. Only the 10mm x 15mm ones look the same.
What size do I need?
Thanks