Hi all, I am hoping someone may be able to assist.
I have a new whirlpool bath with a 1 hp IP55 motor fitted and a small length of 3 core cable coming out of it. A 25 amp 30 ma RCCB has been supplied. I was informed that the bath would run from a fused spur taken from the main ring. Where does the RCCB fit in to the circuit ( between the motor and the fused spur and outside of the bathroom ?).
I have a new whirlpool bath with a 1 hp IP55 motor fitted and a small length of 3 core cable coming out of it. A 25 amp 30 ma RCCB has been supplied. I was informed that the bath would run from a fused spur taken from the main ring. Where does the RCCB fit in to the circuit ( between the motor and the fused spur and outside of the bathroom ?).