A lot of posts mention connecting a 6KW hob using a radial 32amp cooker circuit with 6mm twin&earth cable but I cannot find any reference to the actual lead that goes from the wall cooker connector to the hob itslef.
As far as I can see 6mm or even 4mm flex is not generally available so I persume the hob lead used by most sparkies is just twin&earth ?
One supplier suggested 2.5mm heat resistant flex which can go up to 25amps ?
As far as I can see 6mm or even 4mm flex is not generally available so I persume the hob lead used by most sparkies is just twin&earth ?
One supplier suggested 2.5mm heat resistant flex which can go up to 25amps ?