Hi there, can anyone tell me how to wire a Honeywell CM700RF relay box to a Worcester 24i Junior?
At the moment the boiler is pluged into the wall via a 3 pin plug.
I have a fused spur with 4 wires that the old boiler was connected to.
Inside the relay box it has two sets of terminals NLL (left side) ABC (right side). The instruction booklet is not clear.
Thanks in advance for your help.
At the moment the boiler is pluged into the wall via a 3 pin plug.
I have a fused spur with 4 wires that the old boiler was connected to.
Inside the relay box it has two sets of terminals NLL (left side) ABC (right side). The instruction booklet is not clear.
Thanks in advance for your help.