Ok...
2 storage tanks, side by side, one feeds the cylinder the other has been added to compensate for the pump that was added for the bath.
Basically i had a look and hot water was back filling from the feed to the cylinder so the tank is nice and warm. My boss said stick a check vale on the feed (this is a NO NO right?)
The cylinder has 2 draw off points at the top, one is where the flange has been put in for the pump, and the vent and hot water feed for the bath come off this, the other draw off is another hot water feed.
Any ideas spring to mind?
2 storage tanks, side by side, one feeds the cylinder the other has been added to compensate for the pump that was added for the bath.
Basically i had a look and hot water was back filling from the feed to the cylinder so the tank is nice and warm. My boss said stick a check vale on the feed (this is a NO NO right?)
The cylinder has 2 draw off points at the top, one is where the flange has been put in for the pump, and the vent and hot water feed for the bath come off this, the other draw off is another hot water feed.
Any ideas spring to mind?