Hi,
I have a strange problem (to me) where the hot water pressure in the bath is very low. The reason I think it is strange is because the basin is fine (which is actually higher up than the bath).
We have a combi-boiler powering both. The hot water pressure seems to be so low that is comes out at such a rate that the boiler doesn't properly kick in.
The hot water and the basin are both supplied by the same pipe - I recently fitted a T to branch off for the bath (which is newly fitted).
The bath has a filler system rather than a standard tap, I don't see how this should make a difference (http://www.plumbworld.co.uk/architeckt-avus-bath-filler-1808-16431/2)
I hope someone can help - at the moment the bath has to be filled using a jug from the sink lol.
I have a strange problem (to me) where the hot water pressure in the bath is very low. The reason I think it is strange is because the basin is fine (which is actually higher up than the bath).
We have a combi-boiler powering both. The hot water pressure seems to be so low that is comes out at such a rate that the boiler doesn't properly kick in.
The hot water and the basin are both supplied by the same pipe - I recently fitted a T to branch off for the bath (which is newly fitted).
The bath has a filler system rather than a standard tap, I don't see how this should make a difference (http://www.plumbworld.co.uk/architeckt-avus-bath-filler-1808-16431/2)
I hope someone can help - at the moment the bath has to be filled using a jug from the sink lol.