Hi I have a fault with my dishwasher Hotpoint FDW80 which I have traced to a blown component on the timer module. Unfortunately the device number has blown off the front of the chip when it failed, I don't suppose anyone can help who has a circuit diagram for this machine. The spare part for the timer board is HPTC00144658 and it is component Q005 that I need. It seems criminal to pay £70 for a new one when I can do the repair myself for probably 70p if I can trace the component part number. The component is made by ST microelectronics and ends with a 1 and possibly a 6 or an s before that and TO92 package, the rest is missing. Any help please. Thanks
Hotpoint FDW80 tablet dispenser Triac??
- Thread starter mrfreon
- Start date
Sponsored Links
A recon one here appears to be cheaper, perhaps they can help you with the component. http://www.qer.biz/prodRepairsModel.asp
Regardless of whether you only change the triac or buy a recon pcb it would pay to carefully check the component that particular triac switches.
A fried triac is very often the end result of a shorted electrical component. If you replace the pcb (or triac) without checking...it could pop again
A fried triac is very often the end result of a shorted electrical component. If you replace the pcb (or triac) without checking...it could pop again
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links