hotpoint wf630 washine machine

[clairequine1979]

my machine keeps displaying code f 10 near the end of a spin, hotpoint wf630 any ideas

 

[rocks1]

f10 is a presure fault , first check the filter assy and see if its blocked ,and waste pipe does it go into sink trap

 

[rocks1]

f10 is a presure fault , first check the filter assy and see if its blocked ,and waste pipe does it go into sink trap

 

[clairequine1979]

know it sounds silly but where is the filter assy and the waste pipe does go into sink trap im sure

 

[rocks1]

filter is poss at the back or front pull off kick strip and on the left should be a filter ,if not at the back remove lower panel filter is a big black sump release jubilee clip thats the filter .check the waste pipe on sink trap is that clear of muck