How can I adjust my jigsaw cutting depth?
Currently, I'm using progressor blades for wood cutting and they work fine only they are very long and they cut 50 or 60mm below the jigsaw "shoe".
The reason I care is that I want to cut some of my floorboards along the mid-joist-line, but without cutting down into the joists. My floorboards are around an inch thick so I want to cut 26mm deep but no deeper. If I use my current jigsaw and blades they might cut half way through my joists
[ I'm fairly clumsy so am trying to avoid circular saws/angle grinders if possible. ]
Currently, I'm using progressor blades for wood cutting and they work fine only they are very long and they cut 50 or 60mm below the jigsaw "shoe".
The reason I care is that I want to cut some of my floorboards along the mid-joist-line, but without cutting down into the joists. My floorboards are around an inch thick so I want to cut 26mm deep but no deeper. If I use my current jigsaw and blades they might cut half way through my joists
[ I'm fairly clumsy so am trying to avoid circular saws/angle grinders if possible. ]