Ideal Boiler - No Display

[Samurai]

Hello all,
I would really appreciate some help.

I have an Ideal ISAR HE24 Combi boiler and when I woke up this morning it had stopped working.
Basically the fuse to the control box on the wall is fine and working but the control panel on boiler is showing no LEDs and no fault codes.
When I switch it off and then on again, there is a faint ticking noise for about 5 seconds and then it stops.
The fuse on the control PCB is fine.
So basically, power is getting to it but there's nothing happening and no display. The pressure guage is reading 0 but i'm assuming this is as a result of the boiler being inoperable.

Please help. Thanks.

 

[undercover]

I'd say that pcb has gone.

Don't know if Ideal still offer a fixed price repair.

Or try British Gas for there fixed price repair.

 

[Deleted member 105431]

deffo pcb (possible aav leaked onto it.) absolutely crap boiler though

 

[undercover]

That faint ticking you can hear is the Isar pcb monster "laughing all the way to the bank" at you

 

[Deleted member 105431]

That faint ticking you can hear is the Isar pcb monster "laughing all the way to the bank" at you

or the ideal till ringing at it's next purchase!

 

[diverdee]

well first thing u do is repressure boiler to 1.5 bar then check the stupidly thin plug for the diplay board has not fallen off

 

[gas4you]

Pcb as usual