- Joined
- 27 Jan 2008
- Messages
- 24,891
- Reaction score
- 2,876
- Location
- Llanfair Caereinion, Nr Welshpool
- Country
I have two Energenie MiHome TRV heads controlling two rooms down stairs.
Both have set times to change temperatures.
6 am 24°C
8:30 am 22°C
17:30 23°C
22:30 16°C
For living room as an example, now 8:01 am and target shown as 23°C which should have changed at 10:30 pm last night and then again at 6 am this morning.
Bedroom the same at 8 pm changed to 18°C but at 6 am should have changed to 21°C but target still showing as 18°C.
Same results shown PC, phone and tablet. Happened once before, I blamed low battery voltage so changed them all, however whole idea is I don't need to touch heating, it all should now be automatic, hub powered direct from a USB socket. Above one room and connected to router with hard wiring right next to it.
Any ideas what has gone wrong?
Both have set times to change temperatures.
6 am 24°C
8:30 am 22°C
17:30 23°C
22:30 16°C
For living room as an example, now 8:01 am and target shown as 23°C which should have changed at 10:30 pm last night and then again at 6 am this morning.
Bedroom the same at 8 pm changed to 18°C but at 6 am should have changed to 21°C but target still showing as 18°C.
Same results shown PC, phone and tablet. Happened once before, I blamed low battery voltage so changed them all, however whole idea is I don't need to touch heating, it all should now be automatic, hub powered direct from a USB socket. Above one room and connected to router with hard wiring right next to it.
Any ideas what has gone wrong?