Over the weekend, the dishwasher worked but it sounded like the wash pump was "sticking". Though that seemed to be an intermittent fault.
This morning, the dishwasher filled with water. Sat there for about 30 seconds, and then started to continuously empty water from itself.
If the machine is switched off and on, it still keeps pumping the water out (even when it is empty). You can hear water being continuously allowed in, but pumped straight out.
I do not know the error code, as a number of the LEDs have not worked for quite a while. Apart from the heavy wash (LED 1) is flashing.
Can someone suggest a cause?
Many thanks
Nick
This morning, the dishwasher filled with water. Sat there for about 30 seconds, and then started to continuously empty water from itself.
If the machine is switched off and on, it still keeps pumping the water out (even when it is empty). You can hear water being continuously allowed in, but pumped straight out.
I do not know the error code, as a number of the LEDs have not worked for quite a while. Apart from the heavy wash (LED 1) is flashing.
Can someone suggest a cause?
Many thanks
Nick