Got an Indesit DIS 04 that is tripping the RCD. The trouble is, it is only sporadic. Could go weeks and weeks without doing it, then it will do it 3 or 4 times on the trot, then fine.
Usually occurs around about an hour or so into the wash cycle.
Nothing obvious, no damage to power cable or plug. However when putting mufti meter between the earth and neutral on the plug I get a reading of approx 4 meg ohms. Is this normal? Any suggestions, ideas?
Thanks in advance
Usually occurs around about an hour or so into the wash cycle.
Nothing obvious, no damage to power cable or plug. However when putting mufti meter between the earth and neutral on the plug I get a reading of approx 4 meg ohms. Is this normal? Any suggestions, ideas?
Thanks in advance