Hi, I have an indesit idl530 dishwasher that was working perfectly well until we renovated the kitchen.
I reinstalled the dishwasher in a different location but continued to use the same fill connector and discharge point but on first use the first and third leds were flashing, indicating a discharge blockage and yes found the pipe was crimped preventing discharge but having resolved this problem it now has the second and fourth led flashing indicating a heating problem, I have checked all internal connections and checked the element at 27 ohms.
I contacted the indesit helpdesk who told me to turn off the machine for five minutes then retry, this proved futile, is there a reset procedure to follow after errors?
I would really appreciate any help.
I reinstalled the dishwasher in a different location but continued to use the same fill connector and discharge point but on first use the first and third leds were flashing, indicating a discharge blockage and yes found the pipe was crimped preventing discharge but having resolved this problem it now has the second and fourth led flashing indicating a heating problem, I have checked all internal connections and checked the element at 27 ohms.
I contacted the indesit helpdesk who told me to turn off the machine for five minutes then retry, this proved futile, is there a reset procedure to follow after errors?
I would really appreciate any help.