My Indesit w/d 966W working fine until 2nd wash today. Several minutes into cycle and has filled with water (so should be starting to heat the water), the power light on the power switch goes out and machine stops, nothing happening, sat there full of clothes and water. There is power to the wall socket and the fuse in the machines plug is fine and plug wiring looks fine so am about to go inside suspecting the heating element, although why anything other than an open circuit hasn't blown the fuse I don't know yet, unless; anyone knows of any other safety cut outs, trips or fuses etc inside ? or is the plug fuse the only electrical safety ? in which case I'd be surprised why the fuse is intact but power off to machines power switch ! Any advice or suggestions greatly appreciated.