Indesit WE16 wash machine dead

Joined
26 Nov 2009
Messages
4
Reaction score
0
Location
Devon
Country
United Kingdom
Hi Indesit WE16, six years old working perfectly yesterday, completed cycle fine but today when putting in a new load it's stone dead, checked fuse, ok, checked power inside machine as cable enters, ok, on/off switch is fine, checked for obvious loose connections on boards, all ok but still nothing on the display. I dont have a manual so not sure where to start. Any advice appreciated
 
Sponsored Links
check power down to the pcb at the rear of mc .
 
i'm assuming we're looking at the three wires going into the bottom of the pcb? there's two blue and one brown attached by a plug to the board, I've pulled the plug and measured, there's nothing between the brown and either blue but there's 215volts across the blues!
 
pcb has gone check on the back for burnt tracks.
 
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top