Hi There
I have an Indesit WIDL126 that is about 7 years old. I came home today to find that it had filled with water & as the door was ajar there was a mess on the floor. I swiftly closed the door & ran a drain cycle that cleared it. I then noticed that with the soap depenser out water is slowly dripping again with the washer off. Am I right in thinking this is likely to be the fill valve:
http://www.partmaster.co.uk/cgi-bin...el=WIDL126&path=67146,70202,70206,70223,70305
I assume the machine takes two of these, one for hot & one for cold?
Thanks
I have an Indesit WIDL126 that is about 7 years old. I came home today to find that it had filled with water & as the door was ajar there was a mess on the floor. I swiftly closed the door & ran a drain cycle that cleared it. I then noticed that with the soap depenser out water is slowly dripping again with the washer off. Am I right in thinking this is likely to be the fill valve:
http://www.partmaster.co.uk/cgi-bin...el=WIDL126&path=67146,70202,70206,70223,70305
I assume the machine takes two of these, one for hot & one for cold?
Thanks