My indesit WIDL126S is not drying.
The heating element is fine, I though at first it might be the thermal fuse but, having bypassed it, I get the same problem.
The drum goes round but after a short while i get flashing lights 1,2,4 + door lock. I believe this is error code F13 - dryer ntc/ fan motor.
The machine is almost 5 years old but still washes fine. Is it worth fixing?
Is the ntc the black round looking plug on top of the heater box? How can I check if this is the problem?
am assuming the fan motor is below the heater box containing the heating element and fan? Is this easy to get to with torx set?
To check the fan motor - would it be safe to run the machine with the top of the heater box off?
Any advice would be most helpful, thanks.
The heating element is fine, I though at first it might be the thermal fuse but, having bypassed it, I get the same problem.
The drum goes round but after a short while i get flashing lights 1,2,4 + door lock. I believe this is error code F13 - dryer ntc/ fan motor.
The machine is almost 5 years old but still washes fine. Is it worth fixing?
Is the ntc the black round looking plug on top of the heater box? How can I check if this is the problem?
am assuming the fan motor is below the heater box containing the heating element and fan? Is this easy to get to with torx set?
To check the fan motor - would it be safe to run the machine with the top of the heater box off?
Any advice would be most helpful, thanks.