I'm in the middle of prepping our family bathroom. To save time chipping off the old tiles I cut the lot out, plasterboard too. I've binned the insulation that was in there so I'm going to replace it when I close the walls up.
Question is, what thickness of material do I use. The stud is 60mm thick, can I cram 100mm thick material in as I can only see 50mm or 100mm thickness in Wikes at the moment
Question is, what thickness of material do I use. The stud is 60mm thick, can I cram 100mm thick material in as I can only see 50mm or 100mm thickness in Wikes at the moment