Insulation

Joined
26 Apr 2012
Messages
18
Reaction score
0
Location
Essex
Country
United Kingdom
I am installing plasterboard in the whole house. Need some advice on insulation.

Its a timber framed bungalow, built in 1960's. There was no insulation in the walls, when I started renovating.

The gap between the render and plasterboard is 90mm. The render is cement, but I am plan to replace it with lime one day.

I read somewhere that using insulation can cause damp problems. But having second thoughts now. So far only the bathroom outer walls are done. Mostly doing the ceilings and walls not facing outside for now. I plan to extend the bathroom in a couple of years.

Would insulation make a big difference? If so what type of insulation should I use? Is there a risk of damp?

Thanks for advice.
 
Sponsored Links
Using the insulation of your choice( PIR or mineral/rock wool)
remember that a vapour check membrane will help reduce condensation, this can be done by either installing sheet membrane or fitting duplex/foil backed boards, also the use of foiled backed PIR boards.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top