C
Coniferman
Have a JCB ACR360 about 2 years old. Been rubbish since day one - always clogs up, never collects grass, frequently trips the overheat protection neading to be left for 20 minutes to reset. Hard work unless grass already very short.
It was struggling in some long grass and then stopped working - dead. Left it to cool down but still not working. Is it for the bin? Is it possible the overheat "fuse" has blown and can be replaced? I have checked the mains fuse is good and checked the on/off switch lever is operating. Anything else to test?
Failing this any recommendations:
Medium size garden
Grass collection
Can cope with slightly unlevel ground, stepping stones and narrow corners.
Electric.
Not too big to store.
Only used hover mowers before, will a cylinder be better/easier.
It was struggling in some long grass and then stopped working - dead. Left it to cool down but still not working. Is it for the bin? Is it possible the overheat "fuse" has blown and can be replaced? I have checked the mains fuse is good and checked the on/off switch lever is operating. Anything else to test?
Failing this any recommendations:
Medium size garden
Grass collection
Can cope with slightly unlevel ground, stepping stones and narrow corners.
Electric.
Not too big to store.
Only used hover mowers before, will a cylinder be better/easier.