Hi Folks, sorry if you are sick of this question. I have read many of the similar threads and want to get this right.
I intend putting a seperate single oven and hob where old freestanding cooker was.
30amp mcb feeds cooker switch from CU.
I realise this will only feed the hob John Lewis (AEG) 5.8kw max
How should I feed the John Lewis (AEG) single oven 2.5kw max
(rec min cable 2.5mm2 & 20amp fuse)?
Should I make a fused spur from the cooker switch or is it safe to fit a plug and connect to a nearby socket (on ring main)?
Thanks
TBolt
I intend putting a seperate single oven and hob where old freestanding cooker was.
30amp mcb feeds cooker switch from CU.
I realise this will only feed the hob John Lewis (AEG) 5.8kw max
How should I feed the John Lewis (AEG) single oven 2.5kw max
(rec min cable 2.5mm2 & 20amp fuse)?
Should I make a fused spur from the cooker switch or is it safe to fit a plug and connect to a nearby socket (on ring main)?
Thanks
TBolt