Found this little gadget on a shopping channel and what a little gem it is. Perfect for any job that needs a neat bead of silicone etc. No more of the wetting the finger and hoping for the best. All you do is scrape of the excess amount and the jobs done. Only downside is you`ve more waste but what looks better a nice neat job or blobby that looks like the chuckle brothers have had a go.
Joint-boy
- Thread starter ash1
- Start date
- Status
Sponsored Links
try masking tape on both sides. Lay moderate bead in the gap. Wipe once with wet finger while tape is still on. Then take tape off and wipe once more really lightly, to push down the raised edge of the silicone due to the masking tape.
I always get a really good finnish this way.
______________________________
moderator
post locked to prevent hi-jacking
I always get a really good finnish this way.
______________________________
moderator
post locked to prevent hi-jacking
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
- Status
Sponsored Links
