Can someone tell me why most joist hangers (timber to timber) are 50mm in width, when mmost timber joists are 2" (47mm). Why the 3mm difference? I am undertaking a small decking project and want to purchase 47mm joist hangers for 2" x 4" joists.
The timber yard that I'm buying the joists from advertises the 4"x2" timber as 47mm cuts. I have measured them and they are 47mm. I was just concerned that with a small gap between the timber and the hanger, you could end up with rain water sitting on the bottom of the joist and rotting the timber? Would a professional decker just use 50mm hangers and not be bothered small gaps??
when i have to use joist hangers on a deck then i use whatever comes along. 3mm gap is absolutley nothing, as is the amount of water that will sit in there. If they get wet, then the ret of the deck is alreday wet anyway. As long as it can all breathe and dry out then it doesnt matter
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local