Kenmore Washer pPoblem

Joined
8 Dec 2004
Messages
1
Reaction score
0
Country
United Kingdom
Washer Problems!
Kenmore 110.92587210 Stock 25872 s/n cf0128625

Unfortunatly Sears has no on line or customer assistance for troubleshooting problems.

Suspected bad part Timer 60HZ
part # 3946475

I checked all the obvious!
The plug, the socket and the switch, the circuit breaker.
115 vac is there!
The interlock switch (Lid Closed) works I tested with a ohm meter!
The a program is accurately selected!
No hoses are clogged!

All 5 or 6 the water levels work and fill the tub to the correct water level with no problem.

At this time the problem begins!

The agitating cycle begins but after about 30 seconds to about 1 minute it stops and then a minute later it will start again!
This will continue start then stop, start then stop until completing the full cycle and this continues thru all the cycles, (agitate, drain and spin) except the water fill cycle.


I can advance to the spin cycle and eventually after starting and stopping, and starting and stoping all the water will drain, but it is a very timely process.

Do you agree that the Timer is mot working properly?

Thanks for your heelp in advance,

Ken Meyer

Hicksville, NY
 
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top